Description
- Brand Name: lefavor
- Origin: CN(Origin)
- Certification: CE
- Model Number: Soldering Iron
- Dimensions: Electric Iron
- Temperature Stability: 30-50
- Input Voltagle: 110V / 220V
- Is Smart Device: NO
- Output Power: 60W
- Output Temperature: 200’C-450’C
- Iron Temperature: Adjustable Temperature
- Iron Tips: 900M-T Series
- Heater: Ceramic heater
- Product 1: Soldering iron 220V
- Product 2: Soldering iron 110V
- Product 3: Iron Tips ( I B K 3C 2.4D K )
- Product 4: Heater
- Product 5: Solder Wire
- Product 6: Solder Sucker
- Product 7: Tweezer
- Features 1: Soldering iron
- Features 2: Soldering iron 60w
- Features 3: soldering iron adjustable
- Features 4: adjustable soldering iron
- Features 5: soldering iron station
- Features 6: electric soldering iron
- Features 7: adjustable temperature soldering iron
- Features 8: pencil soldering iron
- Features 9: solder soldering
- Use: Soldering
- Quality: Brand-New
- Warranty: Six-Months
- Note: If you have any problem, I will help you solve the problem.
60W Adjustable Temperature Electric Soldering Iron EU US Plug 110V / 220V Rework Solder Iron Station Welding Repair












Clean ball
IRON TIP:
heater:
tweezers:
Cleaning sponge:
80W Digital display electric soldering iron
Temperature adjustment range:200-500C
I.Temperature Calibration:
1.After 60 seconds of power on, put the soldering tip on a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good touch.
2.When thermometer displays a stable temperature (about 2 seconds), write down the temperature.
3.Move soldering iron away from thermometer; press the (-) and (+) button at the same time to enter temperature Calibration.
4.Input adjustment quantity. Adjustment quantity=set temperature – measured temperature (see example)
5.Press the (-) and (+) at the same time to exit temperature interface, finished. Example 1, when setting temperature is 350℃ while measured temperature is 342℃, the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface. b.press the "+" button till the LCD displays 8℃ c.press the (-) and (+) at the same time to exit temperature correction interface Example 2, when setting temperature is 350℃ while measured temperature is 330℃,the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface. b.press the (-) button till the LCD displays -20℃ c.press the (-) and (+) at the same time to exit temperature correction interface
80W digital display electric soldering iron with switch
Avis
Il n’y a pas encore d’avis.